Introduction

Are you ready to transform your bike into an electric machine? Here are 5 tips and tricks that will help you get started installing your CYC Motor conversion kit.

  1. Gather your tools
    Before you begin the installation process, make sure you have all the necessary tools on hand. You will need a set of Allen wrenches, a bottom bracket removal tool, a torque wrench, and a cable cutter, among other things.

  2. Removing the crankset
    Start by removing the crankset from your bike. This will free up space for the installation of the new CYC Motor electric pedal board. Be sure to follow the manufacturer's instructions for safely removing the crankset.

  3. Install the motor
    Carefully follow the instructions provided with your CYC Motor conversion kit to install the motor. Make sure the motor is properly aligned with the crankset and securely fastened using the recommended torque values.

  4. Connect the components
    Rout the motor cables and connect them to the display, throttle, and battery. Be sure to organize the cables well, using cable ties if necessary, to avoid any potential problems when going out.

  5. Test test your new electric bike
    Before hitting the road, test drive your new electrified bike to make sure everything is working properly. Check motor, throttle, display and battery connections and make adjustments as necessary.

Conclusion

With these tips and tricks, you will be well on your way to a successful installation of your CYC Motor conversion kit. Enjoy the benefits of an electric bike and a more enjoyable riding experience.


leave a comment

×